| CAA-2025-02-018A(已更新) |
2025/08/04 |
EASA |
2025-0043R1 |
A330-243, A330-243F, A330-841 and A330-941 aeroplanes, all manufacturer serial numbers (MSN) having Airbus modification (mod) 207423 installed.
|
|
| CAA-2025-07-003A(已更新) |
2025/07/30 |
EASA |
2025-0151R1 |
Airbus A321-251NX, A321-252NX, A321-253NX, A321-271NX and A321-272NX aeroplanes, all manufacturer serial numbers.
|
|
| CAA-2025-07-008 |
2025/07/28 |
FAA |
2025-15-01 |
(1) This AD applies to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and-900ER series airplanes, certificated in any category.
(2) Installation of Supplemental Type Certificate (STC) ST00830SE does not affect the ability toaccomplish the actions required by this AD. Therefore, for airplanes on which STC ST00830SE isinstalled, a “change in product” alternative method of compliance (AMOC) approval request is notnecessary to comply with the requirements of
14 CFR 39.17
.
|
|
| CAA-2025-07-007(已更新) |
2025/07/28 |
EASA |
2025-0158 |
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A319-173N, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-253NY, A321-271N, A321-271NX, A321-271NY, A321-272N and A321-272NX, aeroplanes, all manufacturer serial numbers (MSN).
|
|
| CAA-2024-10-018A(已被CAA-2025-07-010取代) |
2025/07/28 |
EASA |
2024-0210R1 |
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers, except:
- A319 aeroplanes on which Airbus modification (mod) 28238, mod 28162 and mod 28342 have been embodied in production; and
- A318 aeroplanes on which mod 39195 has been embodied in production, or Airbus Service Bulletin (SB) A320-00-1219 has been embodied in service.
|
|
| CAA-2025-07-006 |
2025/07/25 |
EASA |
2025-0152 |
Airbus A350-941 and A350-1041 aeroplanes, all manufacturer serial numbers (MSN).
|
|
| CAA-2025-05-016A |
2025/07/23 |
EASA |
2025-0118R1 |
Airbus A319-151N, A319-153N, A319-171N, A319-173N, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-251N, A321-252N, A321-253N, A321-251NX, A321-252NX, A321-253NX, A321-253NY, A321-271N, A321-272N, A321-271NX, A321-271NY and A321-272NX aeroplanes, all manufacturer serial numbers.
|
|
| CAA-2021-07-016C |
2025/07/22 |
EASA |
2021-0177R3 |
Airbus A319-171N, A320-271N, A320-272N, A320-273N, A321-271N, A321-272N, A321-271NX and A321-272NX aeroplanes, all manufacturer serial numbers.
|
|
| CAA-2025-07-005 |
2025/07/21 |
EASA |
2025-0139 |
Airbus A350-941 and A350-1041 aeroplanes, all manufacturer serial numbers (MSN), except those on which Airbus modification (mod) 116830 has been embodied in production.
|
|
| CAA-2015-11-005H |
2025/07/21 |
EASA |
2015-0226R8 |
This AD applies to the following helicopters, when equipped with a Goodrich hoist having a Part Number (P/N) as listed in Table 1 of this AD: Leonardo AW109SP, AB139, AW139 and AB412 (all models) helicopters, all serial numbers (s/n); BTI 212, 214 and 412 helicopters (all models), all s/n; BTCL 429 and 430 helicopters, all s/n; AH AS 365 N3, AS 332 L2 and EC225 LP helicopters, all s/n; AHD MBB-BK117 C-2, EC135 and EC635 (all models) helicopters, all s/n; MDHI MD900 helicopters, all s/n; and Sikorsky S-61 (all models), S-76A, S-76B, S-76C and S-92A helicopters, all s/n.
|
|