CAA-2023-10-007(已有後續修訂版) |
2023/10/20 |
FAA |
2023-20-11 |
This AD applies to International Aero Engines, LLC Model PW1124G1–JM, PW1127G–JM,PW1127GA–JM, PW1129G–JM, PW1130G–JM, PW1133G–JM, and PW1133GA–JM engines with
an installed high-pressure compressor (HPC) rear hub, part number 30G4008, with a serial number (S/N) listed in Table 2 or Table 3 of Pratt & Whitney Service Bulletin PW1000G–
C–72–00–0209–00A–930A–D, Issue No: 002, dated June 20, 2023 (PW1000G–
C–72–00–0209–00A–930A–D, Issue No: 002).
|
|
CAA-2020-12-001A |
2023/10/20 |
EASA |
2020-0262R1 |
P.68R “Victor”, P.68C, P.68C-TC, P.68 “Observer”, P.68 “Observer 2” and P.68TC “Observer” aeroplanes, serial number (s/n) 333, 337 to 339 inclusive, 378, 379, and 383 to 524 inclusive, except s/n 387, 398, 410, 418, 426, 508, 514 and 522.
|
|
CAA-2023-10-006 |
2023/10/18 |
EASA |
2023-0181 |
ATR 42-200, ATR 42-300, ATR 42-320, ATR 42-400 and ATR 42-500 aeroplanes, all manufacturer serial numbers (MSN), except those on which ATR modification (mod) 05948 has been embodied in production; and
ATR 72-101, ATR 72-102, ATR 72-201, ATR 72-202, ATR 72-211, ATR 72-212 and ATR 72-212A aeroplanes, all MSN, except those on which ATR mod 05948 has been embodied in production.
|
|
CAA-2023-10-005 |
2023/10/16 |
EASA |
2023-0179 |
Airbus A320-214, A320-216, A320-251N, A320-271N and A321-253NX aeroplanes, manufacturer serial numbers 8781, 8998, 9015, 9036, 9049, 9068, 9077, 9130, 9175, 9197, 9200, 9211, 9216, 9246, 9252, 9253, 9254, 9264, 9273, 9287, 9300, 9306, 9313, 9316, 9317, 9328, 9329, 9331, 9332, 9341, 9343, 9354, 9358, 9363, 9373, 9378, 9384, 9391, 9394, 9428, 9431, 9439, 9446, 9453, 9454, 9457, 9465, 9473, 9482, 9526, 9559, 9574, 9590, 9595, 10019 and 10044.
|
|
CAA-2023-10-004 |
2023/10/13 |
EASA |
2023-0176 |
Airbus A350-941 and A350-1041 aeroplanes, all manufacturer serial numbers.
|
|
CAA-2023-10-003 |
2023/10/11 |
FAA |
2023-20-08 |
General Electric Company (GE) Model CF6–80C2B1F, CF6–80C2B2F, CF6–80C2B4F, CF6–80C2B5F, CF6–80C2B6F, CF6–80C2B7F, CF6–80C2K1F engines, having engine serial numbers (S/Ns) 630–136 through 630–156 inclusive, engine S/Ns 707–510 through 707–645 inclusive, which have accumulated less than 400 engine cycles since new (CSN) on the effective date of this AD.
|
|
CAA-2023-10-002 |
2023/10/11 |
FAA |
2023-18-06 |
The Boeing Company Model 747–100, 747–100B, 747–100B SUD, 747–200B, 747–200C, 747–200F, 747–300, 747–400, 747–400D, 747–400F, 747SR series airplanes, certificated in any categy, as identified in Boeing Alert Requirements Bulletin 747–57A2367 RB, Revision 1, dated March 20, 2023.
|
|
CAA-2023-10-001 |
2023/10/06 |
Transport Canada Civil Aviation |
CF-2023-65 |
Bombardier Inc. model BD-700-1A10 BD-700-1A11 aeroplanes, serial numbers 9001 through 9879, 9998 60001 through 60065.
|
|
CAA-2023-09-008 |
2023/09/27 |
FAA |
2023-13-05 |
(1) This AD applies to all The Boeing Company Model 737–600, –700, –700C, –800, –900,
–900ER series airplanes, certificated in any categy.
(2) Installation of Supplemental Type Certificate (STC) ST00830SE does not affect the ability to accomplish the actions required by this AD. Therefe, for airplanes on which STC ST00830SE is installed, a “change in product” alternative method of compliance (AMOC) approval request is not
necessary to comply with the requirements of 14 CFR 39.17
|
|
CAA-2023-09-007 |
2023/09/23 |
FAA |
2023-17-08 |
This AD applies to General Electric Company (GE) Model GEnx–1B64/P2, GEnx–1B67/P2, GEnx–1B70/75/P2, GEnx–1B70/P2, GEnx–1B70C/P2, GEnx–1B74/75/P2, GEnx–1B76/P2, GEnx–1B76A/P2, GEnx–2B67/P engines with an installed: (1) Stages 6–10 compress rot spool having a part number (P/N) serial number (S/N) listed in paragraph 4, Appendix—A, Table 1 of GE GEnx–1B Service Bulletin 72–0515, R00, dated January 31, 2023 (GEnx–1B 72–0515 R00); (2) Fward seal having a P/N S/N listed in paragraph 4, Appendix—A, Table 2 of GEnx–1B 72–0515 R00;
(3) Stages 6–10 compress rot spool having a P/N S/N listed in paragraph 4, Appendix—A,
Table 1 of GE GEnx–2B Service Bulletin 72–0452, R00, dated January 31, 2023. (GEnx–2B 72–0452 R00); (4) Fward seal having a P/N S/N listed in paragraph 4, Appendix—A, Table 2 of GEnx–2B 72–0452 R00.
|
|