| CAA-2024-04-011 |
2024/05/03 |
FAA |
2024-07-06 |
This AD applies to CFM International, S.A. （CFM） Model LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, and LEAP-1A35A engines with an installed No. 3 bearing spring finger housing having part number （P/N） 2629M62G01 and aserial number identified in Table 1 or Table 2 of CFM Service Bulletin （SB） LEAP-1A-72-00-0504-01A-930A-D, Issue002, dated October 17, 2023 （CFM SB LEAP-1A-72-00-0504-01A-930A-D, Issue 002）.
|
|
| CAA-2024-04-010(已被CAA-2024-04-010修訂取代) |
2024/05/01 |
FAA |
2024-06-15 |
This AD applies to General Electric Company （GE） Model GE90-110B1 and GE90-115B engines with an installed interstage high-pressure turbine （HPT） rotor seal having a part number and serial number listed in Table 1 or Table 2 of GE GE90-100 Service Bulletin （SB） 72-A0908 R00, dated July 7, 2023 （GE SB 72-A0908）.
|
|
| CAA-2024-04-009 |
2024/04/30 |
EASA |
2024-0094 |
Occupant restraint harnesses Part Number （P/N） CI-C-1302.
The affected （Ultramagic） occupant restraint harnesses are known to be installed on, but not limited to, certain Ultramagic hot air balloons. Affected occupant restraint harnesses may however be eligible for installation on any （hot air） balloon and may therefore have been installed during the balloon manufacturing process （production line）, or during an in-service modification, either through using Type Certificate holder approved modification instructions, or a Supplemental Type Certificate （STC）, or through a minor modification approval.
|
|
| CAA-2024-03-010修訂 |
2024/04/30 |
EASA |
2024-0077Correction |
Airbus A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-215, A320-216, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231 and A321-232 aeroplanes, all manufacturer serial numbers （MSN）, except those having Airbus modification （mod） 151574 embodied in production.
|
|
| CAA-2023-01-011A |
2024/04/30 |
EASA |
2023-0013R1 |
DA 42, DA 42 M, DA 42 NG and DA 42 M-NG aeroplanes （including those certified in the Restricted category）, all manufacturer serial numbers （MSN）.
|
|
| CAA-2024-04-008 |
2024/04/25 |
EASA |
2024-0093 |
LEAP-1A23, LEAP-1A24, LEAP-1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29,
LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2 and LEAP-1A35A engines, all serial numbers （s/n）. These engines are known to be installed on, but not limited to, certain Airbus A319, A320 and A321 aeroplanes.
|
|
| CAA-2024-04-007(已修訂版為CAA-2024-04-007A) |
2024/04/24 |
Transport Canada Civil Aviation |
CF-2024-12 |
Bombardier Inc. model CL-600-1A11, CL-600-2A12 and CL-600-2B16 aeroplanes, all serial numbers.
|
|
| CAA-2024-04-006 |
2024/04/24 |
FAA |
2024-06-01 |
This AD applies to The Boeing Company Model 737-600, -700, -700C, -800, -900 and -900ER airplanes, certificated in any category, as identified in Boeing Alert Requirements Bulletin 737-53A1407 RB, dated December 20, 2022.
|
|
| CAA-2023-07-002A |
2024/04/24 |
EASA |
2023-0136R1 |
Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343 and A330-743L aeroplanes, all manufacturer serial numbers （MSN）; and Airbus A340-211, A340-212, A340-213, A340-311, A340-312 and A340-313 aeroplanes, all MSN.
|
|
| CAA-2024-04-005(已修訂版為CAA-2024-04-005A) |
2024/04/23 |
EASA |
2024-0091 |
Airbus A319-111, A319-112, A319-113, A319-114, A319-115, A319-151N, A319-153N, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N and A321-272NX aeroplanes, all manufacturer serial numbers.
|
|