Airworthiness Directives (ADs)
CAA-2019-02-008
The aircraft owner or operator shall comply with Airworthiness Directives issued by the CAA or the aeronautics authority of the State of Design (SoD) of the aviation products, appliances and parts, and take all necessary actions thereto.
-
Issue Date
- 2019/02/15
-
Applicability
- This AD applies to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes, certificated in any category. These airplanes are specified in paragraphs (c)(1)(i) through (c)(1)(vii) of this AD.
(i) Airplanes in Groups 1 and 2, Configuration 1, as identified in Boeing Special Attention Service Bulletin 737-32-1448, Revision 2, dated August 2, 2017 (“BSASB 737-32-1448, R2”).
(ii) Airplanes in Groups 1 and 2, Configuration 2, as identified in BSASB 737-32-1448, R2.
(iii) Airplanes in Group 3, as identified in BSASB 737-32-1448, R2.
(iv) Airplanes in Groups 4 and 5, Configuration 1, as identified in BSASB 737-32-1448, R2, except where this service bulletin specifies the groups as line numbers 3527 through 6510 inclusive, this AD specifies those groups as line number 3527 through any line number of an airplane with an original Certificate of Airworthiness or an original Export Certificate of Airworthiness dated on or before the effective date of this AD.
(v) Airplanes in Groups 4 and 5, Configuration 2, as identified in BSASB 737-32-1448, R2, except where this service bulletin specifies the groups as line numbers 3527 through 6510 inclusive, this AD specifies those groups as line number 3527 through any line number of an airplane with an original Certificate of Airworthiness or an original Export Certificate of Airworthiness dated on or before the effective date of this AD.
(vi) Airplanes in Groups 6 as identified in BSASB 737-32-1448, R2, except where this service bulletin specifies the groups as line numbers 3527 through 6510 inclusive, this AD specifies those groups as line number 3527 through any line number of an airplane with an original Certificate of Airworthiness or an original Export Certificate of Airworthiness dated on or before the effective date of this AD.
(vii) All Model 737-600, -700, -700C, -800, -900 and -900ER series airplanes with an original Certificate of Airworthiness or an original Export Certificate of Airworthiness dated after the effective date of this AD.
(2) Installation of Supplemental Type Certificate (STC) ST00830SE does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST00830SE is installed, a “change in product” alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.
-
Model Number
- The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes
-
CAA AD Number
- CAA-2019-02-008
-
Aeronautics Authority of Original AD
- FAA
-
Original AD Number
- 2019-01-03
-
Effective Date
- 2019/03/19
-
Subject
- This AD required inspection of the forward and aft trunnion pin assemblies of the right and left main landing gears (MLGs) because of corrosion and chrome damage
-
Reference Publications (Revision/ATA/SB)
- ATA 32. This AD replaces AD 2016-18-01(CAA-2016-09-002).
-
Remarks
-
Download
-