Airworthiness Directives (ADs)
CAA-2018-11-008
The aircraft owner or operator shall comply with Airworthiness Directives issued by the CAA or the aeronautics authority of the State of Design (SoD) of the aviation products, appliances and parts, and take all necessary actions thereto.
-
Issue Date
- 2018/11/22
-
Applicability
- (1) This AD applies to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and 900ER series airplanes, certificated in any category.
(2) Installation of Supplemental Type Certificate (STC) ST00830SE does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST00830SE is installed, a “change in product” alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.
-
Model Number
- Boeing Company Model 737-600, -700, -700C, -800, -900, and 900ER series airplanes
-
CAA AD Number
- CAA-2018-11-008
-
Aeronautics Authority of Original AD
- FAA
-
Original AD Number
- 2018-23-09
-
Effective Date
- 2018/12/19
-
Subject
- This AD requires retaining the requirements of FAA AD 2016-13-16, with revised service information. FAA AD 2016-13-16 required an inspection or records check to determine if affected horizontal stabilizers are installed, related investigative actions, and, for affected horizontal stabilizers, repetitive inspections for any crack of the horizontal stabilizer rear spar upper chord, and corrective action if necessary.
-
Reference Publications (Revision/ATA/SB)
- ATA 55. This AD replaces AD 2016-13-16(CAA-2016-07-003). Ref. Boeing Alert Service Bulletin 737-55A1097, Revision 1, dated September 20, 2017.
-
Remarks
-
Download
-
