Airworthiness Directives (ADs)
CAA-2013-02-002C(已有後續修訂版)
The aircraft owner or operator shall comply with Airworthiness Directives issued by the CAA or the aeronautics authority of the State of Design (SoD) of the aviation products, appliances and parts, and take all necessary actions thereto.
-
Issue Date
- 2014/03/27
-
Applicability
- All part numbers of safety belts and torso restraint systems of manufacture by AmSafe, Anjou Aeronautique, Davis Aircraft Products Co., Schroth Safety Products GmbH, Pacific Scientific, installed on any aircraft where dynamically tested seats are required in accordance with
airworthiness requirements like the European Certification Specifications (CS),
or JAR/FAR, paragraphs 23.562, 25.562, 27.562 and 29.562, if safety belts and torso restraint systems have been maintained or repaired after 28 September 2003 by maintenance organizations not holding the applicable maintenance data of the relevant approval holders, unless they are marked
with European Parts Approval (EPA).
The affected safety belts and torso restraint systems may be installed on, but not limited to, the aircraft listed in Appendix 1 of this AD.
Note: This AD is applicable to safety belts and torso restraint systems, whose Component Maintenance Manuals (CMM) explicitly prohibit webbing
replacement, unless this is accomplished by the design approval holder or by
a repair station/maintenance organization authorized by the design approval holder.
-
Model Number
- Safety Belts / Torso Restraint Systems
-
CAA AD Number
- CAA-2013-02-002C(已有後續修訂版)
-
Aeronautics Authority of Original AD
- EASA
-
Original AD Number
- 2013-0020R3
-
Effective Date
- 2014/03/28
-
Subject
- Equipment & Furnishings – Safety Belts / Torso Restraint
Systems – Inspection / Replacement
-
Reference Publications (Revision/ATA/SB)
- ATA 25. This AD revises EASA AD 2013-0020R2(CAA-2013-02-002B) dated 11 July 2013
-
Remarks
-
Download
-
