Airworthiness Directives (ADs)
CAA-2012-11-012
The aircraft owner or operator shall comply with Airworthiness Directives issued by the CAA or the aeronautics authority of the State of Design (SoD) of the aviation products, appliances and parts, and take all necessary actions thereto.
-
Issue Date
- 2012/11/28
-
Applicability
- (1) This AD applies to The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes, certificated in any category, as identified in Boeing Special Attention Service Bulletin 737-54-1043, Revision 2, dated November 4, 2011. (2) Supplemental Type Certificate (STC) ST00830SE does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST00830SE is installed, a ''change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17. For all other AMOC requests, the operator must request approval for an AMOC in accordance with the procedures specified in paragraph (h) of this AD.
-
Model Number
- The Boeing Company Model 737 series airplanes.
-
CAA AD Number
- CAA-2012-11-012
-
Aeronautics Authority of Original AD
- FAA
-
Original AD Number
- 2012-23-08
-
Effective Date
- 2012/12/31
-
Subject
- NACELLES/PYLONS - Strut Drains and Seals - Aft Fairing Drain Tube Assembly Replacement
-
Reference Publications (Revision/ATA/SB)
- (i)This AD supersedes FAA AD 2008-08-24 (CAA-2008-04-007).(ii)Boeing Special Attention Service Bulletin 737-54-1043, Revision 2, dated November 4, 2011.
-
Remarks
-
Download
-
