Airworthiness Directives (ADs)
CAA-2010-08-011
The aircraft owner or operator shall comply with Airworthiness Directives issued by the CAA or the aeronautics authority of the State of Design (SoD) of the aviation products, appliances and parts, and take all necessary actions thereto.
-
Issue Date
- 2010/08/26
-
Applicability
- This Airworthiness Directive is applicable to EMBRAER model ERJ 190-100 ECJ, ERJ 190-100 IGW, ERJ 190-100 LR, ERJ 190-100 STD, ERJ 190-100 SR, ERJ 190-200 IGW, ERJ 190-200LR and ERJ 190-200 STD, all airplanes.
-
Model Number
- ERJ-190-100
-
CAA AD Number
- CAA-2010-08-011
-
Aeronautics Authority of Original AD
- ANAC
-
Original AD Number
- 2010-08-02(BRAZIL)
-
Effective Date
- 2010/09/20
-
Subject
- This AD results from reports that the pylon internal shear pin was found cracked during a regular check. Further investigation revealed that the failure occurred due to hydrogen embrittlement. The ANAC is issuing this AD to prevent insufficient strength of the pylon to wing attachment, which in combination with an engine imbalance caused by a fan blade out could cause pylon to wing attachment failure and consequent engine separation.
Since this condition may occur in other airplanes of the same type and affects flight safety, a corrective action is required. Thus, sufficient reason exists to request compliance with this AD in the indicated time limit.
-
Reference Publications (Revision/ATA/SB)
- Embraer Service Bulletin (SB) No.190-54-0010 or SB No. 190LIN-54-0001.
-
Remarks
-
Download
-