Airworthiness Directives (ADs)
CAA-2020-02-011
The aircraft owner or operator shall comply with Airworthiness Directives issued by the CAA or the aeronautics authority of the State of Design (SoD) of the aviation products, appliances and parts, and take all necessary actions thereto.
-
Issue Date
- 2020/02/27
-
Applicability
- This AD applies to all The Boeing Company Model 737 series airplanes, certificated in any category, except for Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. and Installation of Supplemental Type Certificate (STC) ST00830SE does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST00830SE is installed, a “change in product” alternative method of compliance (AMOC) approval request, per 14 CFR 39.17, is not necessary to comply with the requirements of this AD.
-
Model Number
- The Boeing Company Model 737 series airplanes
-
CAA AD Number
- CAA-2020-02-011
-
Aeronautics Authority of Original AD
- FAA
-
Original AD Number
- 2020-03-10
-
Effective Date
- 2020/03/27
-
Subject
- This AD requires repetitive inspections for discrepancies of fairing panel 194E, wheel well panel 193D, and support structure, and related investigative and corrective actions if necessary, also requires rework of the panels and support structure, which terminates the repetitive inspections.
-
Reference Publications (Revision/ATA/SB)
- ATA 53. Ref. Boeing Special Attention Service Bulletin 737-53-1307, dated January 12, 2012.
-
Remarks
-
Download
-